7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion...

Description

7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
7001 Polyurethane Primer Steel & Concrete | 1 Hr Recoat | Exceptional Adhesion
7001 Polyurethane Primer is a high performance, versatile, single component, moisture cured, non-toxic primer for superior protection of concrete and steel. 7001 is designed for deep penetration, increased bond strength, wetting and sealing of substrates and exceptional corrosive resistance. It provides superior adhesion, toughness, abrasion resistance and flexibility in a wide range of applications.
7001 Polyurethane Primer “cross-links” with polyurea, EPDM and other materials difficult to bond to when properly applied. For applications where set times need to be shortened such as in cold weather conditions or time sensitive applications, an accelerator may be used to reduce set time. Great companion primer with the
5500 Polyaspartic Coating
The 7001 Polyurethane Primer works great as a structural steel primer when used with epoxy, polyurea or polyaspartic topcoats. When used as primer on concrete surfaces can help prevent or reduce problems associated from concrete outgassing.
Comes in 1 gallon and 5 gallon containers.
Moisture resistance underwater
One coat 7001 with two coats of epoxy top coat, per SSPC SP - 10 method for prepared steel. No delamination, blistering, cracking or softening. Expected Life minimum under water - 5 years
Salt Water Exposure
Less than 1/32 inch rust creepage at scribed line after 1000 hours of exposure
Available as optional concentrate for non-hazardous international shipping with solvent added at destination. Comes as a clear, honey colored product.
Where is the 7001 used?
Great companion primer with the
5500 Polyaspartic Coating
Concrete floor primer prior to epoxy, polyaspartic, polyurea or urethane coating
Over steel – tanks and vessels including submerged service
A primer for all polyurea applications
Over EPDM roofing for polyurea applications
Structural steel primer – polyurea, epoxy
Cool conditions for expansion joints, airfields, etc.
Use with ASTC concrete crack repair products 800/830/4034 when moisture present
Why 7001 Polyurethane Primer?
Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
Deep Penetrating Exceptional 1200 psi Adhesion
Superior Corrosion, Abrasion and Water Resistance
For Use in Submerged Service Applications
Quick 1 hour recoat time (based on temperature/humidity)
Semi-flexible & impact resistance
Helps reduce concrete outgassing problems for topcoats
Moisture Cured easy to use 1 Component
Wide application range 35°F - 125°F (1.7°C - 52°C)
Technical Details
Application method
Brush, spray, roll
Top Coat Options
Excellent adhesion for topcoat of polyurea, epoxy, urethane and other coatings
Color
Clear honey colored
Application rate
Recommend 2 to 3mils/coat. Apply 2 to 3 coats on severe use applications 5 to 8 mils total
POT Life
8 hours @70°F Times are lengthened in cold weather. Use an accelerator to speed up set times
Set time
Typically 45 minutes to 1.5 hours (Moisture cured product: high humidity speeds up set time and low humidity slows it down from typical range)
Cure time
2 lhours @ 70°F
Adhesion ASTM D4541
1200 psi
Abrasion ASTM D4060
75 mg loss (1000 cycles CS-17 wheel w/1000 gram load
Application Temp Range
35°F t0 125°F
Shelf Life
12 months when stored between 40°F and 100°F
Apply to New Concrete
Wait at leazst 28 days after pouring new concrete
Size
Price
5 Gallons
$
357.50
1 Gallon
$
82.50
Shipping
Shipping cost:
No cost shipping lower 48 US States FedEx Ground
Delivery time:
Delivery 1 to 5 days after shipment depending on location
Payment
We accept the following payment methods:
PayPal payment due at time of order placement
Please contact us if you have any questions.
Service
PLEASE CONTACT CUSTOMER SERVICE FOR QUESTIONS