12L14 Carbon Steel Bar Stock 9/16" (0.5625) Rounds 12" (2) pieces - cutoffs

Description

INDUSTRIAL CUT-OFFS
TWO (2) pieces 12L14 CARBON STEEL 9/16" (.5625) Cold-Finished Rounds, approximately 12" in length
This is a Buy-it-Now sale for TWO (2) pieces 12L14 CARBON STEEL 9/16" (.5625) Cold-Finished Rounds, approximately 12" in length
(
photos are samples, exact lengths will vary
)
. These are industrial cut-offs.
NOTE:
12L14 is NOT rust-resistant: it is cold-rolled steel and starts getting minor surface rust as soon as it's been cleaned of machine oil.  T
his is superficial and will disappear with a turn or two on the lathe.  If you're storing it for a while, use your cleaning material of choice and then spray with WD40.
NOTE 2: These are cut-offs: lengths are non-standard. All items shipped will fall as closely within these length parameters as possible: none are shorter, some may be a bit longer.
Note 3: f
or whatever reason, this batch has no rust (at least at the moment). We double-checked, it's definitely 12L14 -- took a bit off one of the ends, made chips not curls.
These factory remnants are unused cut-offs from an automatic lathe:
--
Tool marks ARE present
on the rounds.
--They are
NOT de-burred
: burrs will be present on the ends.
--Surfaces may be
scratched
.
Items have been professionally cleaned so are free of machine oil.
Details:
* Contains lead, which adds lubrication and makes 12L14 excellent for free machining
* 12L14 is particularly good for machining close-tolerance parts. Also good for parts involving crimping, bending, or riveting.
* 12L14 gives a smooth, machined surface and allows for increased tool life
* NOT recommended for welding or case-hardening
All lots sold AS-IS with no further guarantees.
Please note: if your state charges sales tax, it will be added to your total at time of purchase.
The order will be shipped via FedEx Ground.
[#1177]